Emetteur AM Solid State 5.000 Watts

SKU: efb1aac451e0 Category:

Description

Emetteur AM Solid State 5.000 Watts

Compact Cabinet Steel.
100% Solid State MOSFET Tecnology
Modulation PDM.
Modular Architecture.
Power Modules connected PLUG-IN.
8 Modules Power of 1,000 watts C / U
Protections of all its parts with fault signaling.
Output tank Lightning, lightning.
Capacity 140% modulation in the positive peek.
High efficiency, typically 80% or better.
Excellent modulation characteristics and low distortion.
Power control in 3 levels from the front panel.
Measurement System Voltage, Current and Power, through Digital instruments.
Temperature compensated oscillator.
Automatic replenishment from the studios.
Local Operating System and Remote System forced air ventilation.
Power supply single or three phase 220/380 vac
Frequency Range any channel within the band of 530 Khz to 1700 Khz.TECHNICAL SPECIFICATIONS
Output Power 5,000 watts nominal.
Load Impedance 50 ohms unbalanced.
Frequency Response + / – 0.5 dB from 40 Hz to 10 kHz.
Harmonic Distortion less than 1.5% to 90% modulation, measured 40Hz to 10kHz.
Modulation Capability Better than 140% in the positive peak at 100% of the nominal power.
Offset Carrier Amplitude Less than 1%.
Radiation Harmonics and Spurious Signals Better than 75 dB below the carrier level.
Residual Noise Better than 65 dB.
Frequency Stability + / – 5 Hz or better.
Audio Input Level + 10 dBm nominal for 100% modulation.
Supply Voltage 220 VAC / 380 VAC with taps of + / – 5% and 10% 1 phase.
Power Consumption Typical efficiency of 80% to 100% of rated carrier.
Operating Conditions Ambient temperature – 5 ° C and 40 ° C.
Relative Humidity between 0% and 90%.
Altitude between 0 and 3500meters.Asl.
Size and Weight ETS model – 5.0 Kw 325 Kg. 197 cm high, Fund 77 cm, width 55 cm.