Emetteur AM 700W

UGS : 0f8e6f07e85e Catégorie :

Description

Emetteur AM 700 watts

 

PDM Modulation
PLUG-IN connected power modules
700 watts Power Module
Protection of all its parts with Failure Signalization
Lightning tank against lightning.
140% Modulaiton Capacity in posivitive peeks
Excellent Modulation and Low Distortion features.
Unique Power control.
Voltage, Current and Power Measurement System , through Digital instruments.
Temperature compensated oscillator.
Automatic replenishment from the studios.
Local and Remote Operating System.
Forced air ventilation system
Single or three phase power supply 110/220 vac
6 rack unities, 19º.
Frequency Range any channel within the band of 530 Khz to 1700 Khz

TECHNICAL SPECIFICATIONS
Output Power 700 nominal watts.
Load Impedance 50 ohms unbalanced.
Frequency Response + / – 0.5 dB from 40 Hz to 10 kHz.
Harmonic Distortion less than 1.5% to 90% modulation, measured 40Hz to 10kHz.
Modulation Capability Better than 140% in the positive peak at 100% of the Nominal power.
Offset Carrier Amplitude Less than 1%.
Harmonics and Spurious Signals Radiation Better than 75 dB below the carrier level.
Residual Noise Better than 65 dB.
Frequency Stability + / – 5 Hz or better.
Audio Input Level + 10 dBm nominal for 100% modulation.
Supply Voltage 110 VAC / 220 VAC with taps of + / – 5% and 10% 1 phase.
Power Consumption Typical Efficiency of 80% to 100% of rated carrier’s nominal power.
Operating Conditions
Ambient temperature – 5 ° C and 40 ° C.
Relative Humidity between 0% and 90%.
Altitude between 0 and 3500meters. Asl.
Size and Weight ETS model – 1.5 Kw, 80 Kgr. High 60 cm, Fund 60 cm, width 54 cm