Airmate USB Radio Production


AIRMATE-USB Radio production console

6x Mic inputs, 12x stereo line inputs

4x inserts on Mic input 1-4

2x USB stereo send/return

2x Built Telephone Hybrids


Mic inputs: bal, 2kOhm, XLR. Phantom: 48 volt.

Noise: – 122 dBr (A-weighted).

Sensitivity: – 70dB min, OdB max.

Insert: -10dBv in/out.

Line inputs: unbal., 10kOhm, Cinch.

Gain: range of 40dB.

Phono inputs: unbal. 47kOhm, 5 mV.

2 Track return: – 10 dBV at 10kOhm.

Aux returns: – 10 dBv at 10kOhm stereo


Fully compliant with USB 2.0 playback and record mode.

HID Functions: Volume/Mute


RJ-11 connectors for phone line/dialler

Mix Minus rejection @1kHz -60dB.


Left/Right: + 4 dBu bal. XLR.

Monitor/Aux : + 4dBu unbal. on Cinch.

Cleanfeed/Announcer: + 4dBu, Jacks. Tape outp: -10dBv, unbal. Cinch.

Headphone: 16-600 Ohm, Jack.

Announcer: 16-600 Ohm, Jack.


High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz bell curve.


AES/EBU digital stereo output and AES digital 2 track input plus existing analog outputs on 2 jacks.


Frequency response: 10 – 60.000Hz. Distortion: < 0.009% max at 1 kHz.

Start switch: reed relay.

Ledbars: 21 segment.

Power Consumption: 30VA

We can offer an optional AES/EBU digital output on XLR’s.

The left XLR output carries the stereo digital output signal and the right XLR is the digital stereo input. At the same time the 2 Track cinch connector carries the converted digital input signal now available as an analog signal that can be listened to by the 2 track front pushbutton knob and rerouted to any input of the console with a stereo cable.

Optional AES/EBU digital


RED LIGHT Stereo jack connector to intern relay (24volt/50mA max.)

Center Contact = Tip

Normally Closed = Shield

Normally Open = Ring

Frequency response 10-60.000 Hz (+/- 0.5dB).

Distortion: <0.009% max at 1 kHz.

Dimensions: 483x356x95 mm ( 8HE ) .

Weight: 9 kg.




Left-Right 19″ rack mountable. (482mm width)

Front-Back: 356mm (8HE).

Height: 95mm.

Space below front panel: 20mm for table top. Weight: 11 kg.

For Drop through mounting cut a hole of 450 x 330 mm (console height is 95mm)


We can supply you a perfect matching ON-AIR lamp for € 120,–.

Actually there is no lamp inside anymore, just everlasting high intensity red leds. The unit is powered by a 12 volt DC 450 mA external power supply which is included in the price.

And what’s more… no hassle with how do I connect this thing to my AIRMATE-USB.

No complicated AC switching with external relays etc. etc.

What you only need is one stereo cable (wired tip/ring) coming from the MIC-ON (located in the master section)  connector on the back of the AIRMATE-USB console that goes directly hardwired to a barrier strip inside the ON-AIR LAMP.

How easy is this for a change.

The power adapter will also be directly wired to the barrier strip inside the unit.

Dimensions: width 260mm, height: 125mm, Depth: 65mm

Cable entry holes and key slot holes in the backside.

© 2020 Eletec Broadcast Equipement Radio / TV & Solution de diffusion. Fabricant et revendeur d'équipements d' émission FM - TV - DAB - DVBT - AM. Studio FM et TV clé en main. Design & Optimized by
back to top