MillenDigitalConsoleheader-2

Millenium 6 Ch Digital Console

Catégorie : .

Description du produit

Millenium 6 Ch Digital Console

 

 

Millenium Digital Console Features:
• Analog or Digital capable on every channel
• 32 bit resolution
• Sample rate conversion on every input
• All outputs available in analog or AES/EBU digital format
• 10 extra auxiliary output buses
• Up to 10 fully programmable mix-minus outputs
• Serial RS-232 interface.
• Sleek new front-panel styling

Measurements are made with 600 ohm loads connected to the analog outputs.
0 dBu equals 0.775 volts RMS independent of load impedance,
0 dBm equals 0.775 volts into a 600 ohm load.Reference Level:
+4dBu equals -20 dBFS. FSD equals
Full Scale Digital equals +24 dBuAnalog Line Inputs
Input Impedance:
40 k ohms, instrumentation amplifier balancedInput Level Range:
jumper selectable nominal input level of -16 dBu, -6dBu or +4 dBuInput Level Trim:
software trim (digital gain adjust) +/-12.5 dB.Input Headroom:
20 dB above nominal inputAnalog Monitor Inputs
Input Impedance:
10 k ohms minimum, differentially balancedInput Level Range:
Adjustable +4 dBu nominal, -10 dBu minimumInput Headroom:
20 dB above nominal inputMicrophone Preamplifiers
Input Impedance: 10 k ohms
Source Impedance: 150 ohms

Input Level Range:
Selectable in 5 dB steps, -62 dBu to – 22dBu

Equivalent Input Noise:
-128 dBu, 150 ohm source, 20 kHz measurement bandwidth

Input Headroom:
20 dB above nominal input

Analog Outputs
Output Source Impedance:
Output Buses < or = 50 ohms balanced.

Output Load Impedance:
50-600 ohms minimum – factory selected

Nominal Output Level:
+4 dBu

Maximum Output Level:
+24 dB

Digital Inputs
Signal Format:
AES-3, S/PDIF

Signal Compliance:
24 bit

Input Sample Rate:
32 kHz – 96 kHz, sample rate conversion is provided for all digital inputs

Input Level:
-20 dBFS nominal

Input Level Trim:
software trim (digital gain adjust) +/-12.5 dB.

Input Headroom:
20 dB above nominal input

 

Dimensions
All consoles are 27 inches deep and 9 inches tall
6 channel: 20.75 inches long
12 channel: 32.75 inches long
18 channel: 44.75 inches longDigital Outputs
Signal Format:
AES-3Signal Compliance:
24 bitOutput Sample Rate:
48 kHz / 44.1 kHz / 32 kHz – Crystal SelectedDigital Reference:
Crystal (internal) or external AES-3 input at 48 kHz 100 ppmInternal Sample Rate:
48 kHz / 44.1 kHz / 32 kHz – Crystal SelectedProcessing Resolution:
32 bit floating point DSPConversions:
A/D 24-bit, Delta-Sigma, 256x oversampling;
D/A 24-bit, Delta-Sigma, 256x oversamplingLatency:
<1.0 ms, analog in to analog outFrequency Response
Line Input to Program or Utility Output:
+0 dB/-0.5 dB, 20 Hz to 20 kHz

Microphone Input to Program or Utility Output:
+0dB/-.5dB, 20 Hz to 20 kHz

Dynamic Range
Analog Input to Analog Output:
106 dB referenced to FSD, 22 kHz measurement bandwidth, 109 dB « A » weighted

Analog Input to Digital Output:
109 dB referenced to FSD, 22 kHz measurement bandwidth, 112 dB « A » weighted

Digital Input to Analog Output:
109 dB referenced to FSD, 22 kHz measurement bandwidth, 112 dB « A » weighted

Digital Input to Digital Output:
123 dB referenced to FSD, 22 kHz measurement bandwidth, 126 dB « A » weighted

Total Harmonic Distortion + Noise
Analog Input to Analog Output:
<0.008%, 20 Hz to 20 kHz, +23 dBu
input, +23 dBu output, 22 kHz measurement bandwidth

Analog Input to Digital Output:
<0.004%, 20 Hz to 20 kHz, +23 dBu input, +23 dBu output, 22 kHz measurement bandwidth

Digital Input to Digital Output:
<0.0005%, 20 Hz to 20 kHz, -1 dBFS input, -1 dBFS output, 22 kHz measurement bandwidth

Digital Input to Analog Output:
<0.004%, 20 Hz to 20 kHz ,-1 dBFS input, +23 dBu output, 22 kHz measurement bandwidth

Isolation
Program-to-Program or Program-to-Utility:
>88 dB, 20 Hz to 20kHz A Input to B Input, B Input to A Input, >100 dB

Stereo Separation
Analog Program Outputs:
>88 dB, 20 Hz to 20 kHz

Warranty
Warranty is two years from date of receipt. All factory non-warranty service is guaranteed for 90 days. For full warranty information, refer to the product manual.

Technical assistance is available at all times at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems.

*Specifications are subject to change without notice

 

© 2016 Eletec Equipement radio television Broadcast Fabricant et revendeur d'équipements FM - TV - DAB - DVBT Design & Optimized by iGent Digital

Click Me