Emetteur TV VHF/UHF 50 W
Emetteur TV VHF/UHF 50 W
Emetteur TV VHF/UHF 50 W
Emetteur TV VHF/UHF 50 W
GENERAL
Power supply
Operating temperature range
Storage temperature range
Maximum relative humidity
Dimensions
120 - 230Vac, 36/48 Vdc
0° C to + 45° C
-10° C to + 70° C
90%non condensing
Std. 19" rack 3HE
VIDEO PARAMETERS
Video input signal level (ex adj)
White level limiter (int. adj.)
2T K Factor
2T chroma.luminance delay
Amplitude /frequency response
Differential gain
Differential phase
Line time distortion
Field time distortion
AM noise (weighted)
PM noise (weighted)
Sync pulse compression
1V p.p (75 Ohm) BNC connector
95%
< 3%
+/- 5цs
+/-0.5 dB (throughout the vision band)
< 5%
< 5°
< 1%
< 0.5%
< 60dB
< 55dB
< 3%
AUDIO PARAMETERS
Audio input signal level (ex. Adj)
Audio pre-emphasis
Audio input impedance (balanced)
Audio frequency response
Harmonic distortion
0 dBm +/- 6 dB Mini Canon connector
50 цs or 75 цs or flat
600 Ohm or 10 KOhm unbalanced
+/-0.5 dB 30Hz÷15KHz
< 0.5%
IF PARAMETERS
Vision Intermediate Freq.
IF Filter
Group delay tolerance
Different specifications
38.9 MHz
SAW acoustic device
± 50 nS
TEM can provide most TV std.
OUTPUT RF PARAMETERS
Output frequency ranges
Output impedance
Output VHF power
Output UHF power
Spurious suppression
Harmonic suppression
Rejection of out-of band IMD
Intermodulation products
Frequency stability
Video and audio carrier
B. III - IV - V
50 Ohm unbalanced
10 and 50W
10 and50W
> 60 dB
> 60 dB
> 60 dB
< -55 dB (with linearity precorrector)
1 ppm (with oven) or external 5/10 MHz
PLL controlled from 10 MHz crystal
Various
External interfaces Logic and analog signal













